Hook, Receiver No. A
For Watch Receivers on Telephone No's 20, 22, 24 and 26.
|
|
Hook, Receiver No. B
For Watch Receivers on Telephone No's 2 (old pattern) and 12.
Finishes - Nickelled or Oxidised.
|
|
Hook, Receiver No. C
For Watch Receivers on Telephone No's 16 or 125.Drawing - 62251
|
|
Hook, Receiver No. D
For use with Receivers, Watch No. 1B on Telephone No's 2 or 4.
Drawing No. 62251.
|
|
Hook, Receiver No. E
For use on intermediate panels of Section Switch. Detachable hook
for Receivers, Watch No. 1B. Used with Switch Receiver, No's 1 to 3.
Drawing - 62251
|
|
Hook, Receiver No. F
Detachable hook (oxidized) for Receivers, Bell, No. 1A. Used with
Switch, Receiver, Nos. 1 to 3.Used on Telephone No's 1, 2, 3, 4, 10, 11, 55, 65, 72,
76, 77, 79, 82, 121, 136, 150, 156 and 160. May or may not have a hole
through the rounded section. Finish - Nickelled. Drawing No. 62251.
|
 |
Hook, Receiver No. H
For Watch Receivers on all wall Telephones when required.Used on
Telephones No's 1,3 & 11.
Effectively a cup hook.
Drawing - 62251
|
|
Hook, Receiver No. J
For Watch Receivers on Telephones No's 53, 67, 71, 97 or 99 with
Receiver, Bell No's 1A or 3G.Brass with a finish of Copper Oxide and
lacquered.
Drawing - 62251
|
|
Hook, Receiver No. K
Detachable hook (oxidized) for Receivers, H.G., at subscribers.
Used with Switch, Receivers, Nos. 1 to 3Used on Telephone No's 1, 2, 3, 4,
10, 11, 55, 65, 72,
76, 77, 79, 82, 121, 136, 150, 156 and 160. Drawing - 62251
|
|
Hook, Receiver No. L
Used with Receiver, Watch No. 6L on 100 and 200 type Bakelite Telephones.This
is a clamp (fits around the telephones neck) with a rod attached.
Nickelled finish.
|
 |
Hook, Receiver No. M Side of
switchboards. Detachable hook used with Switch Receiver No's 1 to 3.
Used with Telephone No. 184.
|
 |
Hook, Receiver No. N Switchboards,
panels etc. For Telephone No. 184. Also used on Cases, Switch,
Fire-Telephone.
|
 |
Hook, Receiver No. S As for ‘M’ above
|
 |
Hook, Receiver No. T
For use with Brackets, Telephone No. 12.
For Receiver, Watch No. 6L.
|
|
Hook, Receiver No. U
For use on Units, Telephone, PA No's 1 to 4.
Detachable hook for Telephone No. 164.Finishes - Black, Gilded or
Nickelled.
|
|
Hook, Receiver No. V
For use on Units, Telephone, PA No. 6.
Detachable hook for Telephone No. 164
|
|
Hook, Receiver No. W
For use on Units, Telephone, PA No. 7.
Detachable hook for Telephone No. 164.
|
|
Hook, Receiver No. X
For Watch Receivers on 300 type Bakelite Telephones.This hook
just slides down and locates on the flutes at the rear of the telephone
case. Chromium plated.
|
 |
Hook, Receiver No. Y
For use with Brackets Telephone No. 14. Used with Receiver
Watch No. 6L.Introduced in 1938.
Drawing 63729
|
|
Hook, Receiver No. Z
For use on Telephone No. 47 (Mark 4).
Detachable hook for Telephone No. 184.Made from Brass and finished in
a stoved, dull black enamel.
Introduced in 1938.
Drawing - 62882
|
|
Hook, Receiver No. AA Used on Key &
Lamp Unit SA4062 - 10/10 FUW Telephone No's 164 and 184.
Made of Hard Brass (.0125"). Introduced in 1939.
|
|
Hook, Receiver No. AB Used on
wooden wall telephones with a Bakelite handset. Introduced in 1944
Drawing - 71024 |
|
Hook, Receiver No. AC Hook for
supporting a handset. Two lengths available 6½" or 7¾".
Superseded by Hooks, Receiver AD. Diagram - 66143 Introduced 1946 |
|
Hook, Receiver No. AD Hook for
supporting a handset. Two lengths available 8" or 9¼". Superseded
Hooks, Receiver AC. Diagram - 66238 Introduced 1947 Mild Steel
C.R.C.A. with a finish of NI P. MT. |
|
Hook, Receiver No. AF Used on
Switchboards, CB873 (5+20).
|
|
Hook, Receiver No. AG
For Watch Receivers on Telephone No's 706 and 710.This hook
takes the place of the normal case fixing plate. Introduced in 1964.
Steel, EN.58A180 HV. Min 5kg, Spec BS 1449 16swg (.064) Polished
Drawing - 91785
|
 |
Hook, Receiver No. AH
For Watch Receivers on Telephone No. 711.Introduced in 1964.
The finish was - Steel, EN.58A180 HV. Min 5kg, Spec BS 1449 16swg (.064)
Drawing - 91799
|
 |
Hook, Receiver No. AK
For Watch Receivers on 740 and 746 Telephone No's 740 and 746.
This hook is fitted in the finger slot. The screw fed through
ventilation slots found under the integral case handle. Introduced in
1971. Brass hard, Spec BS265 .080". Finish was Ni P Pol, Spec M37 Drawing - 93256
|

|
|