L. M.
ERICSSON | ||||||
TELEPHONE - WALL HC 110 These types are intended to be combined either with the galvanic telephone sets HC 120 - 200 or with the telephone sets with inductor HC 510-520. Based on the incoming signal, the phone's bell rings regardless of which number the switcher is set to. When the signal arrives, the switch is turned to the position marked A, after which calls can take place. If you wish to talk to one of the other devices from one device, you set the switch to the number of the device in question and give a signal by means of a push button, resp. inductor. These types can also be used for single lines. The types HB 100/10-100/20 are equipped with external clamps for the connection; in the case of types HB 110/30-110/50, the cable is connected directly to the contact pins inside the device. Superseded the model 416.
|
||||||
Last revised: March 21, 2024FM2 |