CORDS No's 4 & 6

These Cords fit Teles 282A, 284, 284A & 290.

CORD 4/133	4 WAY REPLACEMENT CORD FOR HOSIDEN BESSON TELE 290.
		1.5M CORD WITH PLUG 430A ON ONE END AND PLUG FCC68 ON OTHER.

CORD 6/10A	6 WAY CORD FOR USE ON ALL ABOVE MENTIONED TELES.
		200mm CORD WITH A JACK TO TAKE A PLUG 631A AND AT THE OTHER
		ARE 6 SPADE CONNECTORS.

CORD 6/10B	6 WAY CORD FOR USE ON ALL ABOVE MENTIONED TELES.
		FOR USE IN TXE2 EXCHANGES - PLUGS INTO CONNECTOR 207D.
		200mm CORD WITH A JACK TO TAKE A PLUG 631A AND AT THE OTHER
		END A PLUG 242A.


CORD 6/10C	6 WAY CORD FOR USE ON ALL ABOVE MENTIONED TELES.
		FOR USE WITH STROWGER EQUIPMENT.
		200mm CORD WITH A JACK TO TAKE A PLUG 631A AND AT THE OTHER
		END A PLUG 230.

CORD 6/10D	6 WAY CORD FOR USE ON ALL ABOVE MENTIONED TELES.
		FOR USE WITH KRONE CONNECTORS.
		200mm CORD WITH A JACK TO TAKE A PLUG 631A AND AT THE OTHER
		END A KRONE 4 POLE PLUG.  INCLUDES AN EARTH CONNECTION.

CORD 6/10E	6 WAY CORD FOR USE ON ALL ABOVE MENTIONED TELES.
		200mm CORD WITH A JACK TO TAKE A PLUG 631A AND AT THE OTHER
		END 3 CROCODILE CLIPS.  INCLUDES AN EARTH CONNECTION.

CORD 6/10F	6 WAY CORD FOR USE ON ALL ABOVE MENTIONED TELES.
		FOR USE IN TXE4 EXCHANGES - PLUGS INTO CONNECTOR 207D.
		200mm CORD WITH A JACK TO TAKE A PLUG 631A AND AT THE OTHER
		END A MOULDED 2 PIN PLUG.

CORD 6/10G	6 WAY CORD FOR USE ON ALL ABOVE MENTIONED TELES.
		FOR USE IN TXE2/TXE4/TXK EXCHANGES FOR U POINT WORK.
		200mm CORD WITH A JACK TO TAKE A PLUG 631A AND AT THE OTHER
		END A MOLEX CONNECTOR.

CORD 6/10H	6 WAY CORD FOR USE ON ALL ABOVE MENTIONED TELES.
		FOR USE WITH JACK TEST 44.  WIRED FOR 2 WIRE WORKING.
		200mm CORD WITH A JACK TO TAKE A PLUG 631A AND AT THE OTHER
		END A PLUG 510.

CORD 6/10J	6 WAY CORD FOR USE ON ALL ABOVE MENTIONED TELES.
		FOR USE WITH JACK TEST 44.  WIRED FOR 4 WIRE WORKING.
		200mm CORD WITH A JACK TO TAKE A PLUG 631A AND AT THE OTHER
		END A PLUG 510.  USED ALSO WITH ADAPTOR TEST 3A.

Last revised: December 04, 2010